Metal Tile Trims

Metal tile trims also know as tile edge trims are finishing and edge-protection profiles for ceramic and stone tile floor coverings. They come in a variety of shapes, finishes, patterns and sizes. The tile edging in aluminium, stainless steel and brass is the most common trim used in medium to high end building projects.

National Tile Trims carries the most popular of these tile edging trims so customer can complete their building projects with ease.

The "L"  Shaped Profile provides clean transitions between tile and other surfaces such as carpet and hardwood. This tile edging trim also provides edge protection, surface definition and is available in a number of finishes. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.

The Quadrant or Quarter Circle profile is an attractive edging profile for corners of external walls. It  has a smoothly rounded surface and creates beautiful accents and decorative designs.

The Square Edge Profile or Box Edge Tile Trim distinguished by its squared reveal surface, provides both transitions on walls and floors as well as profile for a contemporary home design. This tiling trim creates modern decorative designs and interesting contrasts.

Material Selection

Stainless steel is highly recommended for public and high traffic areas due to mechanical strength and chemical resistance.Stainless Steel profiles should be chosen where high levels of hygiene are sought, such as food processing industries, breweries, dairies and hospitals.

Aluminium has a wide variety of applications and is sought after for its range of profiles and complex shapes. Aluminium is also lightweight, ductile and easy to cut and use.It also provides a medium degree of mechanical strength.Aluminium has many variants of finish, including bright and matt colour anodising.

Brass is an elegant material and is highly regarded by architects and interior designers.It is mechanically very sturdy. It is best suited to indoor application and has a warm gold colour

Profile Height

When choosing profile height, it is recommended to add 1.5-2mm to your tile thickness to allow enough mortar beneath the tile so that it bonds nicely to the trim.

Handy Hint

Always remove excess grout immediately after grouting to avoid discolouration. Fresh cement can cause bad staining(oxidation marks), and once oxidation marks have been allowed to appear,it is practically impossible to remove them.